Materials we use

We build boats from the very beginning. Especially for them, we have developed our own material based on natural rubber, which guarantees good boat durability. They are resistant to abrasion, aging and sunlight.

 

NITRILON^® DROP-STITCH

Material composition: outer coating based on synthetic rubber (1), anchoring layer (2), high-strength PES cloth (1 100 dTex) (3), anchoring layer (4), natural and synthetic rubber coating (5), natural and synthetic rubber coating (6), anchoring layer (7), top sheet of drop-stitch cloth (8), spacing fibres of drop-stitch cloth (9). Minimum tensile strength is 3 600/3 100 N (20 × 5 cm sample). Minimum weight is 1,270 g/m2.

 

NITRILON^®    

Material composition: high-strength PES fabric (1) with outer synthetic rubber coating (2) and inner natural rubber blend coating (3). The material is highly resistant to abrasion, ageing and UV. Tensile strength min. 3 000/3 000 N (sample 20 × 5 cm). Minimum weight 920 g/m2

 

DOUBLE SIDED - NITRILON^® 

Material composition: high-strength PES fabric (1) with double sided synthetic rubber coating (2). The material is highly resistant to abrasion, ageing and UV. Tensile strength min. 3 000/3 000 N (sample 20 × 5 cm). Minimum weight 1 192 g/m2 .

 

 

NITRILON® - EXTRA

Material composition: high-strength PES fabric (1) with inner and outer layer of synthetic rubber (2) coating and outside NITRILON® EXTRA (3) coating.The top quality material for maximum load and for use in demanding climatic conditions. Tensile strength min. 3 000/3 000 N (sample 20 × 5 cm). Minimum weight 1 487 g/m2.

 

  PES - PUR

Material composition: PES fabric of RIPSTOP (1) type with inner polyurethane layer (2) and Teflon water-repellent finish (3). The material is abrasion, ageing and UV radiation resistant. Minimum pull strength 1 100/900 N (specimen 20 × 5cm).